Colorbond® steel gutters are one of the most popular gutter choices thanks to their sturdy construction and weather-resistant durability. Made from steel coated in zinc and aluminium alloy, Colorbond® gutters can better withstand the elements than other materials.
However, no gutter is invincible. Over time, wear and tear can lead to issues with your Colorbond® gutters that should be promptly addressed.
Failing to identify and fix common Colorbond® gutter problems can lead to bigger headaches down the road. Left unchecked, minor drips can turn into major leaks, small clogs and overflowing messes.
Being proactive with inspection and maintenance is key. In this article, we’ll explore the most common issues that crop up with Colorbond® gutters and show you step-by-step solutions to detect and remedy them.
With a bit of attentive care, you can keep your Colorbond® gutters looking great and functioning properly for years. We’ll look at early signs of rust and corrosion, troubleshoot leaks, prevent overflowing, fix sagging, and avoid downspout clogs. Let’s keep your gutters covered!
5 Common Colorbond® Gutter Issues
While Colorbond® gutters are designed to withstand exposure to the elements, constant weathering can still lead to recurring problems. Recognising the early signs of common Colorbond® gutter issues is key to timely maintenance and preventing larger failures. Here are five prevalent problems to look out for with your Colorbond® gutters:
Corrosion and Rust
Even though Colorbond® steel contains a zinc and aluminium alloy layer to resist corrosion, rust can still develop. Prolonged exposure to moisture, standing water, and environmental contaminants will cause the protective coating to deteriorate.
Visible signs include rust spots, flakes or pits on the surface of gutters. Clearing debris blocking proper drainage, sealing joints with silicone, and spot-painting rust areas can address corrosion.
Leaking Gutter Joints
Gaps between sections of connected gutters often lead to leaking joints. The gaps allow water to drip out from between the seams. Check for any visible water leaks around joints. Clean the joints thoroughly, reseal them with exterior silicone sealant, and replace any worn-out gutter brackets.
Overflowing Gutters
Water can back up and overflow when gutters get clogged with leaves, twigs and other debris. Regular cleaning maintenance is key. Installing gutter guards adds extra protection by filtering out debris. Check that downspouts are also clear of any obstructions causing backups.
Sagging Gutters
An incorrect gutter pitch is the result of poor gutter installation. Gutters not installed at the proper slope or pulled away from the fascia can start to sag. Additional weight from debris buildup or failure of the gutter spikes or hangers can also cause sagging. Re-hang the entire gutter system on the right slope and add support braces as needed.
Downspout Blockages
Like a gutter system, downspouts are prone to clogging from accumulated debris. This prevents proper drainage and causes clogged gutters to overflow. Routinely clear out any debris in downspouts. Adding gutter downspout filters can also help catch leaves and debris before they enter.
How to Identify Common Colorbond® Gutter Issues
Identifying problems with your Colorbond® gutters early is critical to prevent small issues from becoming major failures requiring complete replacement. Inspect your gutters closely during routine cleaning for some telltale signs of common problems.
Look for any rust spots or corrosion, signalling the protective coating is compromised. Examine gutter joints for roof leaks, as gaps can develop over time and cause dripping. Check that water flows freely and doesn’t pool or back up, which indicates a blockage or improper slope.
Watch for overflowing, sagging, or misaligned sections that require adjustment. Downspouts should also be clear of debris clogs.
Attention to these visual clues will allow you to catch Colorbond® gutter deterioration before it escalates into a costly headache. A little preventative maintenance goes a long way.
Keep Your Colorbond® Gutters Flowing Free!
The gutters around your roof are easily one of the most important but often underappreciated elements on a commercial or residential property. Keeping your Colorbond® gutters in good working order requires being vigilant about spotting issues before they spiral out of control.
Now that you know what to look for, you can catch problems like rust, leaks, debris buildup, and sagging through routine inspections and maintenance. Addressing these common Colorbond® guttering system failures promptly will maximise their longevity and prevent more costly repairs down the road.
For reliable Colorbond® gutter installations, gutter repairs, or replacements, contact A.I Gutter & Roofing professionals. Their experienced team can inspect your existing gutters and recommend solutions to any issues discovered. They also offer affordable, quality installations of new Colorbond® gutters customised to your home and landscaping.
With proper routine care and the help of experts like AI Guttering when needed, you can rely on your Colorbond® gutters to successfully drain rainwater safely away from your home’s foundation for years before any major overhaul is required. Don’t wait for small problems to take hold - schedule an inspection with AI today!
FAQs
How can I prevent corrosion and rust on my Colorbond® gutters?
To prevent rust and corrosion on your Colorbond® gutters, it’s important to regularly clean out any leaves, twigs, and other debris. This debris can accumulate and hold moisture against the gutters, compromising the protective coating over time. Annually sealing any seams and joints in the gutters using a high-quality exterior silicone sealant can help close gaps where water could leak and cause rust.
It’s also a good idea to inspect the gutters a few times per year and spot-paint any areas where rust has already started forming to stop it from spreading. You can apply a dedicated rust-inhibiting paint formulated for metal roof gutters during installation or as needed for even more protection.
Why do my gutter joints leak even though they have gutter sealant?
If you notice leaking along your gutter joints even though you’ve applied gutter sealant, the likely culprit is that the original sealant has worn away or detached over time. Gutter sealant won’t last forever, so you’ll need to reapply fresh sealant periodically to maintain an effective moisture barrier.
Carefully clean out any old, cracked sealant from the joint using a putty knife. Make sure the joint area is clean and dry before applying new exterior-grade silicone gutter sealant per the manufacturer’s instructions.
Over time, gutter spikes and hangers can also become loose or detached, potentially causing the gutters to sag and open up the joints. Replacing any damaged or missing spikes/hangers can help.
My gutters overflow and spill over even after cleaning - what should I do?
Suppose your gutters are frequently overflowing and spilling over the edges even after you’ve cleaned them out. In that case, it likely indicates an underlying problem with the slope or alignment of the gutters themselves.
A proper slope is required for water to drain down the gutters effectively. Use a level to check if they are pitched at the standard 1/4 inch per 10 feet of gutter.
If not, you may need to detach and rehang the gutters at the required angle. You should also check that all gutter sections are properly aligned and seated next to each other without any major gaps or separations along the run. When gutter joint separation occurs, this leaves a significant vulnerable area for water to damage walls, siding, gutters, fascia and roofing materials.
Realigning and rehanging the gutters can solve chronic overflow issues. Adding gutter guards can also help filter out debris that could be clogging the gutters.
What causes gutters to start sagging?
There are a few common reasons gutters may start to sag over time. If the pitch angle is too flat, water might get stuck in your gutters instead of flowing. Not only does that lead to stagnant water (and all the issues that come with that), but it also puts pressure on your broken gutters and increases the chances of sagging and other problems.
Accumulating debris like leaves and sediment over the years can add extra weight, causing gutters to droop. Additionally, the gutter spikes, screws, or hangers that secure the gutters to the fascia board can deteriorate and fail due to age and exposure to the elements. This allows the gutters to disconnect and start sagging.
Poor gutter pitching and sloping will eventually lead to rainwater pooling, spilling over the sides, and damaging the roof. Promptly replacing any damaged gutter hardware can help.
How do I unclog a blocked downspout?
If your downspout becomes clogged with debris, an easy solution is to use a plumber’s auger or drain snake to clear out the blockage. Feed the auger down the downspout, twist it to break up, and pull out any built-up leaves, mulch, or other debris causing water to back up.
Flush the downspout with a garden hose at full pressure after clearing it to remove any remaining particles. To help prevent future clogging, consider installing downspout filters or guards over the openings to catch leaves and debris before it plug into the downspout.
How often should I inspect my Colorbond® gutters?
To keep your Colorbond® gutters in good working order, it’s recommended to do a thorough inspection and cleaning at least two times per year. The best times are during the spring to clear any debris buildup from winter and fall to remove fallen leaves before the wet weather sets in. If you have large overhanging trees near your home, you may need to inspect and clean more frequently, such as each season. Look for any signs of rust, gutter leaks, sagging, blockages, and overflow to address issues promptly.
